Cement-Based Anti-Corrosion and Anti-Pollution Ceramic Coating System TC-C5031/5032/1030
This product is a multi-layer ceramic coating system, comprising a base ceramic coating (TC-C5031), an intermediate high-hardness ceramic layer (TC-C5032), and a functional fluorosilicone ceramic coating (TC-C1030). By leveraging the synergy of these layers, the coating achieves uniform mechanical strength and hardness.
Cement-Based Anti-Corrosion and Anti-Pollution Ceramic Coating System TC-C5031/5032/1030-Description
Introduction
This product is a multi-layer ceramic coating system, comprising a base ceramic coating (TC-C5031), an intermediate high-hardness ceramic layer (TC-C5032), and a functional fluorosilicone ceramic coating (TC-C1030). By leveraging the synergy of these layers, the coating achieves uniform mechanical strength and hardness.
Physical Parameters
| Parameter | TC-C5031 | TC-C5032 |
|---|---|---|
| Appearance | Light-colored, homogeneous liquid | Brown, light-colored, homogeneous liquid |
| Solvent | Water-based | Water-based |
Note: For detailed information on TC-C1030, please refer to its TDS.
Main Features
Designed for waterproof and anti-corrosion protection on cement substrates.
Application Areas
Applicable to ports, bridges, highways, and rail transit infrastructure requiring waterproof and anti-pollution protection.
Usage Instructions
- Application Methods:
- Can be applied by spraying, roller coating, or brushing.
- Ensure the substrate is dry and clean before application.
- Application Process:
- Keep the base layer as dry as possible before coating.
- For highly absorbent cement surfaces, a denser primer layer is recommended.
- The bottom layer should be dry before the next application step.
- The interval between the base layer and the intermediate layer should be approximately 1 hour.
- The interval between the intermediate layer and the top layer should be approximately 2 hours.
Storage
- Store in a sealed container in a cool, dry place. Avoid direct exposure to open flames.
- Shelf life (in unopened condition) is up to 12 months.
- If stored for an extended period, stir well before use. If no sedimentation occurs, the product remains usable.
Packaging Specifications
Available in 1L/5L/25L packaging. Custom packaging can be arranged upon request.
Safety Precautions
- This product is non-toxic and non-irritating but should be applied in a well-ventilated area.
- Keep away from open flames and heat sources.
- Avoid direct contact with skin and eyes. In case of contact, rinse immediately with clean water or a neutral detergent. If irritation persists, seek medical attention.
- Wear protective gloves and masks when handling the product.
Performance Testing
| Test Item | Test Conditions |
|---|---|
| Adhesion Strength | 4H |
| Water Contact Angle | >100° |
| CASS Corrosion Resistance | >1000 hours of salt spray resistance |
| Weather Resistance | >1200 hours of artificial weathering resistance |
| Hydrothermal Resistance | 100 consecutive cycles of hydrothermal resistance |
| Anti-Pollution Performance | No contamination or adhesion in cement-based coating environment |
Special Statement
- The information in this document is based on the company’s research and test results, combined with user feedback. As application environments and conditions may vary, this document serves as a reference only and does not constitute a product warranty.
- Users are advised to conduct necessary tests before actual use to confirm product suitability. The company is not responsible for any losses due to improper use.
