Glass-Specific Anti-Stain Hydrophobic Ceramic Coating TC-C1032

Product Description

Introduction

This product is a special hydrophobic and anti-stain ceramic coating based on a combination of inorganic and organic materials. It is an environmentally friendly, water-based, low-VOC coating with ultra-high hydrophobic properties, excellent stain resistance, and self-cleaning capabilities.

Physical Properties

• Appearance: Colorless to light yellow translucent liquid
• Density: 0.88
• Flammability: Non-flammable

Main Features

• Forms a durable and invisible waterproof coating on the surface of glass and ceramics.

Application Scope

• Can be used for glass, ceramics, stone, metal, and other surfaces requiring hydrophobic and anti-stain coatings, such as building curtain walls, glass panels, and bathroom protective coatings.

Usage Instructions

1. Ensure the surface is clean, dry, and free from dust or oil. Apply the coating evenly using a lint-free cloth or applicator pad.
2. Allow the coating to dry naturally. The surface will appear dry in 4-7 minutes, and a full reaction occurs within 24 hours, forming a durable hydrophobic layer.
3. After drying, polishing with a microfiber cloth can enhance the gloss and performance.
4. The coating can be cured at room temperature or with heat. Heat curing (e.g., 80°C for 10 minutes) can improve adhesion and durability.
5. Once fully cured, the coating is highly resistant to solvents such as PMA, acetone, ethanol, toluene, THF, MIBK, and dichloromethane.
6. If applied to non-absorbent surfaces, excess material should be wiped off within 5-10 minutes after application to prevent streaking.
7. For TC-C1032, excessive rubbing after application is not recommended, as it may reduce coating thickness.
8. In humid environments, condensation may affect the coating uniformity. It is recommended to apply at moderate temperature and humidity conditions.

Storage Instructions

1. The product should be stored in a sealed container, protected from moisture and fire.
2. The recommended storage temperature is below 25°C.
3. The product has a shelf life of 12 months under proper storage conditions.
4. If the product solidifies, gentle heating can restore usability.

Packaging Specification

• Available in 1L/5L/25L sealed containers; bulk orders can be customized.

Safety Precautions

1. Avoid contact with skin and eyes. If contact occurs, rinse immediately with clean water.
2. Use gloves, protective glasses, and appropriate protective clothing when handling the product.
3. Work in a well-ventilated area to minimize inhalation of vapors.
4. If irritation or allergic reaction occurs, seek medical attention immediately.

Performance Testing

Special Notice

• The above data is based on laboratory testing and is provided for reference. Actual performance may vary depending on application conditions.
• Users should test compatibility before large-scale use.
• The manufacturer is not responsible for any improper application that results in failure or damage.